Rod end bearings with a 3/4-inch hole size are commonly used for supports. These rod end bearings are supplied with two jam nuts for mounting and are available in steel, stainless steel, and ...

A Fastenerating Look at Nuts ‘n’ Bolts. Originally published in the May 1987 issue of Hot Rod magazine ...

Install PPE Tie-Rod ... the PPE sleeve simply slips over the link and takes the place of the stock jam nut. Due to its length, the PPE tie-rod sleeve ... there is no need to re-align the front end.

Place the remover around the head of the broken wheel stud, behind the hub. Center the driving screw over the broken end of the stud and tighten it with a socket wrench until the stud pops out the ...

A Case for Heim Joints. While tie-rod ends have several great qualities, they are not perfect for every situation. Heim joints are commonly used for steering on buggies and race trucks because ...

tightening track rod locking nuts. Hi, My car is currently at the garage (Skoda main dealer) for its first MOT and I just recived a list from the garage of MOT failures and advisories. Amongst the ...